In the 1985 mannequin year, Toyota introduced a virgin SUV based on the maker's compact pickup, the 4Runner. In 1990, Toyota completely redesigned its pickup, which meant the 4Runner received a redesign extremely. This redesign gave the SUV a bounteous rounded appearance and extra voguish headlights. The 1990 4Runner with four-wheel propel came morals with a 116-horsepower, 2.4-liter four-cylinder and had an optional 150-horsepower, 3.0-liter V-6 available. Both engines used a inconsequential electric Engine to Eccentric person the engine as you turn the ignition important. When the starter fails, you must remove it in trail to either change it with a advanced one or rebuild it.
Instructions
1. Remove the rejection battery cable from the 4Runner's batter, using a combination wrench. Position the battery cable aside to prevent unforeseen reconnection.
2. Stand the front of the 4Runner, using a floor jack, and slide jack stands under the Toyota's frame rails. Lower the 4Runner onto the jack stands.
3. Crawl under the 4Runner and fix the starter on the transmission bell-housing -- where the engine and transmission appropriate.
4. Press the locking Press-stud on the starter wiring harness and pull the harness from the starter. Remove the peanut holding the faculty wire to the starter, using a ratchet and socket. Pull the force wire from the starter.
6. Cover the starter in the bell-housing and hand-tighten the starter-retaining bolts. Tighten the starter-retaining bolts to 29 foot-pounds, using a torque wrench and socket.
5. Remove the two starter-retaining bolts, using a ratchet and socket. Pull the starter toward the front of the vehicle to remove it from the transmission bell-housing. Pull the starter downward and gone of the vehicle.
7. Plug the wiring harness into the contemporary starter. Position the starter gift wire on the worthy publicize on the starter and hand-tighten the power wire-retaining peanut. Tighten the dynamism wire-retaining peanut with a ratchet and socket.
8. Stand the 4Runner off the jack stands, using a floor jack. Pull the jack stands from under the SUV and lower the Toyota to the ground.
9. Fix the dissension battery cable back on the battery and tighten the battery cable with a combination wrench.
