Rear opinion mirror
Rear view mirror glue eventually deteriorates and loses its accept on the mirror. The mirror can fall off unexpectedly or a Knob may account Sufficiently of a jolt to detach the mirror from the windscreen. This would contrive a dangersome driving case for you and for the other cars on the course of action. Get characteristic glue from an Car parts store, imaginary specifically for attaching the rear illustration mirror to the windscreen to full this mild concervation calling.
Instructions
1. Allure a string enclosing the glue outline on the out of the windscreen using a crayon, washable marker or enlarge pencil. Whether you attract the limit encompassing the glue outline on the inside, it Testament be cleaned off when you Disinfected the remaining glue off the glass.
2. Scrape the remaining glue off the inside of the glass with a razor blade. Practise positive to remove all remaining glue by rubbing the earth with your finger; be persuaded the field is smooth and all of the glue is elsewhere.
3. Wash the inside of the glass with glass cleaner and dry completely.
4. Scrape the remaining glue off the mirror mount using the razor blade, and then Disinfected it with glass cleaner.
5. Locate the small screw on the bottom of the stem located between the mirror and the mount. Use a small screwdriver to remove the screw and separate the mirror from the mount. Put the screw back into the hole, so that you do not lose it.
Remove the tape and place the mirror onto the mirror mount. Reinstall the screw into the hole. Tighten until firm, but do not over-tighten, or you may strip the screw.
Hold it there for about 30 seconds.
8. Cut a piece of masking tape long enough to tape the mount to the glass until the glue dries. Push the tape onto the glass, over the mirror mount and onto the glass on the opposite side of the mirror mount. Allow the glue to dry completely, according to the directions on the package, before removing the tape.
9.6. Apply a couple of drops of rear view mirror glue to the mirror mount.7. Position the mirror mount within the outline created on the outside of the glass and press firmly onto the glass.
