Keyless entry provides expeditive access to your vehicle.
The Chrysler PT Cruiser uses a keyless remote action. The Chrysler dealer provides two workshop remotes at the duration of obtain. More or replacement workshop keyless remotes can be purchased at a Chrysler dealer or you can shop for them from an online source. Remotes purchased online may be cheaper, nevertheless Testament desire programming. You can programme more remotes yourself, on the contrary you'll require a working remote to cook so. At the bit of your vehicle pay for, a jotter including programming directions should be if. Contact your dealer provided you cannot set your vehicle album.
Instructions
1. Subsume the workshop programmed key into the ignition switch and turn the switch to the "On" position. The "On" position is before the "Start" position. The vehicle's motor will not run in this position.
2.3. Press any button on the new key. A chime sound indicates that the key is programmed to the vehicle's system.4. Turn the factory programmed key in the ignition switch "Off" to exit the transmitter programming mode.
Press and hold the "Unlock" button on the programmed key for approximately five to 10 seconds. While holding the unlock button press the "Panic" button. A chime sound indicates that the transmitter programming mode is active. Release the "Unlock" and "Panic" buttons simultaneously.
Test the newly programmed remote by pressing its "Unlock" and "Lock" buttons. Repeat the programming process if the remote is not operational.
