You can remove the Volkswagen Jetta's dashboard console own your own, without having to earnings a technician to end the calling for you. Removing the sprint allows you to daily grind on Accoutrement, such as the radio and AC, which would be otherwise be unable to be accessed. You Testament include To possess both a Torx screwdriver and Phillips tendency screwdriver locate in line to remove the screws that influence the sprint into assign. With the equitable instruction, you can remove your Jetta's sprint in less than ten minutes.
Instructions
1. Remove the two screws underneath the anti-slip mat with a Torx screwdriver.
Avail the Torx screwdriver to remove the two screws underneath the anti-slip mat tray, on top of the dashboard. The anti-slip mat tray is located directly above the stereo console.
2. Employment the two Apartment lodgings mind screwdrivers to wedge the sprint board out of place. This will allow you enough room to receive a hold of the dash, so that you can remove it.
4. Use the Torx screwdriver to remove the four screws surrounding the radio to remove remainder of the dash. You can now access the radio for replacement purposes, or the internal AC control equipment.
3. Lift the dash from the back with your fingers, and carefully pull it upwards. The clips in the front that hold the dash into place will come loose when the dash is lifted towards the roof. Although the dash will be removed, it will have a cable connecting it to the vehicle.
