You can rainless the codes on your Corolla.
Verify on the instrument cluster that all warning and service lights have shut off. Sensors are positioned throughout the Corolla that detect malfunctions and packages this dossier in the die of error codes to the personal computer, which in turn illuminates a warning bright on the instrument panel. The sensors further detain track of the usual concervation needs of the automobile, and this is displayed on the instrument panel in the contour of a service light. Do not attempt to clear the error codes until you have had the vehicle serviced or repaired. The lights will keep turning themselves on if you prematurely reset the computer.
Instructions
1. Plug the scanner into the Diagnostic Link Connector (DLC) on the lower part of the driver's side dashboard near the hood release.
2. Put the key into the ignition, and turn it to the "on" position. Don't crank the engine. The scanner will turn on automatically.
3. Locate a command on the scanner that says "Erase Codes" or something similar. Select this command. Once the scanner has completed the task, it will display "Command Sent" or just return you to the main menu.
4. Unplug the scanner, and start the engine.You can luminous the error codes on your Toyota Corolla exactly from your local garage, saving yourself hour and coinage. Corollas imaginary in 1996 or closest come average with an On-Board Diagnostics II machine (OBD II), whereas earlier Corollas come with an OBD I pc. You Testament charge to obtain or borrow an OBD I or II scanner to peruse and rainless the misconception codes.
